下挖3-5米滾筒篩式淘金船設備清單
流程簡介：
原料通過挖斗進入四絞刀絞洗筒進行絞洗脫泥，然后進入滾筒篩內進行篩選分級為：<6mm細料、6-30mm粗料、30mm以上廢料三個級別，其中30mm以上廢料直接通過廢料溜槽排出至廢料區域；
6-30mm粗料進入一臺振動溜槽進行回收后，廢料排出至廢料區域；
<6mm細料排入盛料箱中，通過沙泵進入一臺臥式全自動連續排礦離心機內進行精選，精料排入精料筒內，廢料由廢料管排出。
Technological process
The material from the bucket shipped into the trommel screen fixed with 4 reamers which can ream and wash the clay off,then to be separating into 3sizes <6mm,6-30mm＞30mm,the biggest size useless are directly discharged to waste area by scrap sluice;
6-30mm material into shaking chute for recycling, scrap material discharged into the waste area;
The small size material <6mm gettinginto the material box through sand pump feeding into a horizontal auto&no break discharging centrifuge, then the concentrate got and finally into fine material box, scrap material to be get rid from waste pipe.
技術參數
|
名稱 |
規格 |
數量 |
功率 Power/KW |
備注 |
|
浮體 |
單寬1.8米，高0.92米，長25米 |
1套 |
|
|
|
挖斗式洗沙機 Bucket type sand washing machine |
主支架高5.6米：16#槽鋼對扣 |
1套 |
37 |
|
|
滾筒篩 |
絞洗筒長2.2米，四條絞刀 |
1套 |
7.5 |
|
|
臥式離心機 |
1200#連續排礦全自動離心機 |
1套 |
21.5 |
PLC電腦控制 |
|
振動溜槽 |
1350*4500mm |
1套 |
3 |
|
|
大臂卷揚機 |
400#減速機 |
1臺 |
11 |
|
|
主錨 |
350#減速機 |
1臺 |
3 |
|
|
錨繩卷揚機 |
3KW |
4臺 |
12 |
|
|
水泵 |
7.5KW |
1臺 |
7.5 |
|
|
離心泵 |
7.5KW |
1臺 |
7.5 |
|
|
沙泵 |
4inch |
1臺 |
11 |
|
|
配電柜 |
含至設備電機線 |
1套 |
- |
|
|
發電機組 |
150KW |
1套 |
- |
|
|
總用量功率 |
同時用電量121KW，工作中用電量：95KW(不含照明及其它建議用150KW發電機組) (not including lights,we advise to use150KW generation unit) |
|||
上一篇內容：挖斗式淘金船